How much does a concrete flatwork cost in Dayton, OH?
Driveways, walks, aprons and steps with joints and finish. Priced against Ohio material costs, a typical DIY concrete flatwork in Dayton runs about $2,757 in materials — 4% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Dayton cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Dayton (DIY materials) | $2,343 | $2,757 | $3,722 |
| National average | $2,441 | $2,872 | $3,877 |
Priced from the Ohio material index — 4% below the national average. Based on a common-size concrete flatwork; enter your own dimensions for an exact number.
DIY materials estimate: $2,757. A contractor in the Dayton market (materials plus about 79 labor hours at ~$54/hr) estimates to $6,793–$9,109. Estimated DIY savings: $4,963 (64%).
Permit thresholds vary by project. Check with the local building department before you start.
Outside city limits, Montgomery County is typically the permitting authority.
Get your exact Dayton price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a concrete flatwork cost in Dayton, OH?
Materials typically run $2,343–$3,722 for a common-size project using Dayton-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Dayton?
DIY materials estimate to about $2,757. A local contractor estimates to $6,793–$9,109 at the Dayton-area labor rate of roughly $54/hr, so DIY could save an estimated $4,963 (64%).
Do I need a permit for a concrete flatwork in Dayton?
Permit thresholds vary by project. Check with the local building department before you start. Montgomery County and the City of Dayton rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Dayton concrete flatwork pricing different from the national average?
We apply a regional material cost index for the Dayton market — currently 4% lower than the national average. Labor is indexed separately at about $54/hr for the contractor comparison.
Other projects in Dayton
Concrete flatwork cost in nearby cities
Looking at the whole state? Concrete flatwork cost in Ohio.