How much does a drywall & paint cost in Irvine, CA?
Hang, tape, finish and paint a room from bare studs. Priced against California material costs, a typical DIY drywall & paint in Irvine runs about $805 in materials — 18% above the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Irvine cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Irvine (DIY materials) | $684 | $805 | $1,087 |
| National average | $580 | $682 | $921 |
Priced from the California material index — 18% above the national average. Based on a common-size drywall & paint; enter your own dimensions for an exact number.
DIY materials estimate: $805. A contractor in the Irvine market (materials plus about 18 labor hours at ~$78/hr) estimates to $2,090–$2,802. Estimated DIY savings: $1,570 (66%).
Permit thresholds vary by project. Check with the local building department before you start.
Outside city limits, Orange County is typically the permitting authority.
Get your exact Irvine price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a drywall & paint cost in Irvine, CA?
Materials typically run $684–$1,087 for a common-size project using Irvine-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Irvine?
DIY materials estimate to about $805. A local contractor estimates to $2,090–$2,802 at the Irvine-area labor rate of roughly $78/hr, so DIY could save an estimated $1,570 (66%).
Do I need a permit for a drywall & paint in Irvine?
Permit thresholds vary by project. Check with the local building department before you start. Orange County and the City of Irvine rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Irvine drywall & paint pricing different from the national average?
We apply a regional material cost index for the Irvine market — currently 18% higher than the national average. Labor is indexed separately at about $78/hr for the contractor comparison.
Other projects in Irvine
Drywall & paint cost in nearby cities
Looking at the whole state? Drywall & paint cost in California.