How much does a drywall & paint cost in Arlington, TX?
Hang, tape, finish and paint a room from bare studs. Priced against Texas material costs, a typical DIY drywall & paint in Arlington runs about $662 in materials — 3% below the national average. These are estimates only, not a quote — enter your real dimensions in the free calculator for a shopping list matched to your build.
Estimates only — not a quote.
Arlington cost breakdown
| Estimate | Low | Typical | High |
|---|---|---|---|
| Arlington (DIY materials) | $563 | $662 | $894 |
| National average | $580 | $682 | $921 |
Priced from the Texas material index — 3% below the national average. Based on a common-size drywall & paint; enter your own dimensions for an exact number.
DIY materials estimate: $662. A contractor in the Arlington market (materials plus about 23 labor hours at ~$48/hr) estimates to $1,719–$2,304. Estimated DIY savings: $1,291 (66%).
Permit thresholds vary by project. Check with the local building department before you start.
Outside city limits, Tarrant County is typically the permitting authority.
Get your exact Arlington price
Enter your dimensions for a materials list and cost estimate matched to your build.
Frequently asked questions
How much does a drywall & paint cost in Arlington, TX?
Materials typically run $563–$894 for a common-size project using Arlington-area pricing. That is an estimate, not a quote — our free calculator prices your exact dimensions.
Is it cheaper to DIY or hire a contractor in Arlington?
DIY materials estimate to about $662. A local contractor estimates to $1,719–$2,304 at the Arlington-area labor rate of roughly $48/hr, so DIY could save an estimated $1,291 (66%).
Do I need a permit for a drywall & paint in Arlington?
Permit thresholds vary by project. Check with the local building department before you start. Tarrant County and the City of Arlington rules can be stricter than the state baseline — run the free permit lookup for your ZIP before buying materials.
Why is Arlington drywall & paint pricing different from the national average?
We apply a regional material cost index for the Arlington market — currently 3% lower than the national average. Labor is indexed separately at about $48/hr for the contractor comparison.
Other projects in Arlington
Drywall & paint cost in nearby cities
Looking at the whole state? Drywall & paint cost in Texas.