Closet Build Calculator
Partition framing, drywall, shelving, rods and paint.
Closet Build Calculator results
Estimated materials $514. Estimate only.
Enter your ZIP to re-price materials, or keep national averages.
Shopping list
| Item | Qty | Unit | Total |
|---|---|---|---|
| 2×4 studs (8') | 13 | $4/ea | $55 |
| Plate stock | 27 | $1/ft | $15 |
| Drywall 1/2" (4×8) | 5 | $17/sheet | $83 |
| Drywall screws | 1 | $11/box | $11 |
| Joint compound | 1 | $18/bucket | $18 |
| Paper / mesh tape | 1 | $7/roll | $7 |
| Shelving (Melamine board) | 20 | $8/ft | $158 |
| Shelf brackets / clips | 12 | $4/ea | $50 |
| Shelf cleat stock | 20 | $1/ft | $26 |
| Closet rod | 7 | $3/ft | $24 |
| Rod bracket pairs | 2 | $10/pair | $19 |
| Caulk | 1 | $7/tube | $7 |
| Paint / primer | 1 | $42/gal | $42 |
| Includes 10% waste allowance ($48) | $514 | ||
Build summary
- Floor area
- 12 sq ft
- New wall run
- 8 ft
- Wall area
- 64 sq ft
- Studs
- 13
- Plate stock
- 27 ft
- Rod
- 7 ft
- Waste allowance
- $48
Cut list & field notes
Wall studs — 13 @ 91.5" (wall height less plates)
Cut one, test fit, then gang-cut the rest.
Plates — 6 @ 8' total
Double the top plate and screw the bottom plate into the floor framing.
Shelves — 3 @ 71.75" × 24"
Leave 1/8" clearance each end so the shelf drops in without scuffing the paint.
Closet rod — 1 @ 71.5"
Set the rod 12" off the back wall and 66" up for long hanging clothes.
Finishing the drywall yourself?
The drywall calculator prices sheets, mud, tape and screws for the whole room.
Open drywall calculatorCloset build-outs for remodelers
Price a reach-in or walk-in closet on the spot: partition framing, drywall and finishing, shelving by material, rods and paint, with a branded proposal the homeowner can approve that day.
- Takeoff priced to your ZIP in minutes
- Cut list that trims the lumber order
- Branded proposal and invoice PDFs
Material and cost output is an estimate, never a quote. Permit content is guidance to verify with your local building department.